What would you do if you discovered that your neighbor’s WIFI password was password12345? They clearly do not understand the importance of using strong passwords, which means they have likely left their WIFI network vulnerable to attack by hackers and other malicious users.
If you would like to point out their weak security practices and make them aware of the importance of choosing strong passwords, this article will show you how to hack your neighbor’s WIFI password in just a few simple steps.
Introduction
Do you hate your neighbour’s Wi-Fi? Do you want to learn how to hack your neighbour’s WiFi password so that you can use their internet for free? If so, this article will teach you everything you need to know about hacking into your neighbour’s WiFi network. First, let’s get into the basics of how Wi-Fi networks work!
A Guide to Hacking
WIFI hacking is a bit of an advanced topic, but not so difficult to perform for those who are interested. Here’s a simple step-by-step guide that will walk you through how to hack your neighbour’s WIFI password.
Why do you need your neighbour’s WIFI password?
To use their WIFI network, of course! If you’re out of range or want a faster connection, it’s much easier to hop on your neighbour’s network than fiddle with router settings. But while most people know they can see their neighbours’ Wi-Fi SSIDs (and may even be able to determine their passphrases), few know how easy it is to actually hack into a neighbour’s wireless access point and the internet. All you need is time.
Steps for hacking a neighbour’s WiFi password
Find out your neighbour’s SSID (the name of their WiFi network). This is usually written on a label on your neighbour’s router, but if not, you can also sometimes find it by visiting 192.168.1.1 or doing a Google search for “Network Name + My ISP in quotes,” where My ISP is replaced with your Internet Service Provider. Step 2-Once you know your neighbour’s SSID, write it down.
Step 1: Monitor all activity.
Use a tool like Fing to monitor all activity on your neighbour’s network. After a few days of monitoring, you should be able to pinpoint the regular times that they use their Wi-Fi, so you can plan accordingly. Once you have narrowed down their schedule, it’s time for step 2.
Step 2: Find their IP address
The first step in hacking your neighbour’s WiFi password is finding their IP address. All computers on a network have an individual number called an IP (internet protocol) address, which identifies them and shows where they are located. So how do you find your neighbour’s IP address? The simplest way is to look it up online.
Click Here to Know more about What is IP Address and Why is it Important
Step 3: Get into their network using MAC spoofing
To get into their network, you’ll need to create a new MAC address using your computer, which will spoof your device’s identity on their network. This method is particularly effective because it doesn’t require you to be physically close enough to their router for them to see what device you’re using.
Step 4: Find the wireless network name (SSID)
The easiest way to access a neighbour’s Wi-Fi is through their router, which is identified by its unique SSID. To find your neighbour’s SSID, simply follow these steps. Step 5: Use Google: Type [neighbour’s name] [street address] wifi password hack into Google and see what comes up. You should be able to easily find out how they are securing their network and if they have any weak spots in security (such as no encryption). If you can get on their network, you can hack it!
Step 5: Capture and analyze packets
Once your password hacking software has finished running, you’ll know if your neighbour uses a WEP or WPA-PSK network. Either way, cracking their network is easy, especially with tools like aircrack-ng. Here is how to use it.
Step 6: Identify the Wifi Router
First, identify your neighbour’s wireless router. This will tell you which method of hacking is most appropriate. One popular kind of router is DD-WRT, a customized Linux distribution for wireless devices, while Openwork is a framework for Linux-based operating systems designed for embedded systems. Tomato is a replacement firmware for select wireless routers. It can usually be seen on other people’s computers or smartphones that are connected to the router. Alternatively, if you know someone who lives in the same area as you and they share your network, they can usually tell you what type of router is being used. So, once you know what kind of router your neighbour has, take some time researching that type online before attempting any hacks.
Step 7: Scan for Available Wifi Networks
You probably already know that your smartphone has an app for GPS navigation, but did you know that it also comes with a powerful wifi-scanning tool? By using your phone’s wifi scanning capability, you can identify nearby wifi networks—including yours. To get started, open up your phone’s settings menu and tap on WiFi. Next, choose advanced options (if it isn’t already enabled). From there, scroll down until you see a section labelled “advanced settings.” This will be where you can turn on wifi scanning and monitor your surrounding environment for available wireless signals. Once wifi scanning is turned on, keep moving around until you find other networks.
Step 8: Use Wifiphisher To Catch The WPA Handshake
There are a couple of options for grabbing a Wi-Fi password, but Wifiphisher is one of our favourites. (It’s also easy to set up.) It works by launching phishing attacks on all devices that connect to your network using its default SSID and password. It then presents each user with a fake website prompting them for their username and password and uses those details to log in and change the router’s SSID and password. When someone tries connecting again, they will be directed straight to your new login page instead of handing over their details as usual.
Step 9: Crack the Handshake Using Aircrack-Ng
The admin password for most home routers can be found on a sticker attached to it. If you can’t find it, try looking for a diagram of which buttons do what on your router. Find that, and check out which buttons are used for setup or configuration. This will probably be labelled something like “restore defaults” or “system reset.” The idea is that if someone else knows your password, they can easily change it and lock you out of your own home network—and if they happen to know how to hack wifi passwords, they might also have access to all of your sensitive information. So don’t make it easy for intruders by leaving default passwords intact!
Step 10: Resetting the Router Admin Password
Most routers come with a default password of “admin” or “password”. Sometimes there’s a hint in the router setup interface on how to change that password, but if not, you can often reset it back to its factory default settings. That will depend on what type of router you have, but typically, it involves pressing a button and holding it for several seconds. Afterwards, enter “admin” as your username and leave everything else blank. When it restarts with its default settings, use those same credentials to log in. You should now be able to access your router without any problems.
Final section: Putting it all together
To hack your neighbour’s wifi password, do a quick search for “free wifi password finder.” There are a lot of them out there, but most require you to pay for a premium account. However, there are some free options available: 1) KeePassDroid is a free open-source Android app that pulls data from cloud storage on Dropbox and allows you to browse through saved logins for various sites using only your Android phone. 2) WifiKeyView is also a free program that allows you to locate and decrypt stored wifi passwords.
Conclusion
We hope you enjoyed our blog about how you can protect yourself from bad WIFI passwords. We understand that your WIFI password should be a strong one, and we hope this blog has given you some ideas on how to create one. If you want to know more about why you should stay safe on the internet, why not contact us at _? We look forward to hearing from you!